This parts kit contains spare parts for the APC product model shown.
Includes: CD with software, Rack mounting brackets, Rack mounting support rails, User manual
Key Features SYH4K6RMI
-Run time for load Min-max: 280-2800 W 1400 W 12m 37s
-Max. Capacity Used : 100%
-Output power capacity : 2.8kWatts / 4.0kVA
-Rack Height : 8U
-Output Connections : (8) IEC 60320 C13 (Battery Backup), (2) IEC 60320 C19 (Battery Backup)
-Nominal Output Voltage : 230V
-Nominal Input Voltage : 230V
-Input Connections : Hard wire 3-wire
Automatic restart of loads after UPS shutdown
-Automatically starts up the connected equipment upon the return of utility power.
Battery modules connected in parallel
-Delivers higher availability through redundant batteries.
Automatic internal bypass
-Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Power Modules connected in parallel
E-nhances availability by allowing immediate, seamless recovery from isolated module failures.
Redundant Intelligence Modules
-Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
Hot-swappable power modules
-Ensures clean, uninterrupted power to protected equipment during Power Module replacement.
-Provides scalability, N+1 redundancy, fast serviceability, and reduced maintenance requirements via self-diagnosing, swappable, and field-replaceable modules.
Hot-swappable intelligence modules
-Ensures clean, uninterrupted power to protected equipment during Intelligence Module replacement.
Configurable for N+1 internal redundancy
-Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
-Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent Card Slot
-Customize UPS capabilities with management cards.
-Alpha-Numeric Display which displays system parameters and alarms.
InfraStruXure Manager Compatible
-Enables centralized management via the APC InfraStruXure Manager.
Intelligent battery management
-Maximizes battery performance, life, and reliability through intelligent, precision charging.
Manageable external batteries
-Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
-Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Avoids costly power problems by keeping your IT equipment and data protected and available .
-Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Peace of mind that comes with complete equipment compatibility and reliability of a market leader .
-Safety agency tested and approved means that you can deploy Symmetra with confidence that they meet or exceed the industry’s most rigorous standards.
Save time with easy and convenient remote accessibility.
-Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Low operating and maintenance costs with proven reliability and intelligent battery management .
-Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Modular, Scalable, Redundant Architecture future proof initial investment, improves equipment availability, and simplifies maintenance.
-Symmetra LX’s redundant N+1 architecture enables the unit to withstand a failures of an intelligence module, battery or power module. Modules are easily replaceable in the field. Customers can add additional power modules or batteries after initial equipment purchase to accommodate loads of up to 16 kVA.
-Ensures clean, uninterrupted power to the loads in the event of an extended power outage
Input power factor correction
-Minimizes installation costs by enabling the use of smaller generators and cabling.
P-rovides temporary battery power when the utility power is out.
Frequency and voltage regulation
-Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Resettable circuit breakers
-Enables a quick recovery from overload events.
-Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
-Protects connected loads from surges, spikes, lightning, and other power disturbances.
-Allows additional run time to be quickly added as needed.
-Ensures compatibility with different input frequencies.
Scalable power capacity
-Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
Field-replaceable power distribution panel
-Ensures compatibility with equipment that has different plug types.
Plug-and-Play external batteries
-Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
-Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification
-Warns when a battery is not available to provide backup power.
-Provides notification of changing utility power and UPS conditions.
User-replaceable power modules
-Enables simple upgrades and replacements of the Power Modules.
-Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
User-replaceable intelligence modules
-Enables simple upgrades and replacements of the Intelligence Modules.
Predictive failure notification.
-Provides early-warning fault analysis ensuring proactive component replacement.
-Max Configurable Power (Watts) : 4.2kWatts / 6.0kVA
-Output Voltage Note : Configurable for 220 : 230 or 240 nominal output voltage
-Efficiency at Full Load : 89.0 %
-Output Voltage Distortion : Less than 5 % at full load
-Output Frequency (sync to mains) : 47 – 53 Hz For 50 Hz nominal Sync to mains, 50 Hz +/- 0.1 % For 50 Hz nominal Unsynchronised
-Load Crest Factor : Up to 5 : 1
-Topology : Double conversion online
-Waveform type : Sine wave
-Bypass : Internal bypass (automatic and manual)
-Input frequency : 50/60 Hz +/- 5 Hz Auto-sensing
-Input voltage range for main operations : 155 – 276V
-Number of Power Cords : 1
-Efficiency at Full Load : 89.0 %
-Input Power Factor at Full Load : 0.98
Batteries & Runtime
-Battery type : Lead-acid battery
-Included Battery Modules : 1
-Typical recharge time : 4hour(s)
-Replacement Battery : SYBT2
-Battery Slots Empty : 4
-Expected Battery Life (years) : 3 – 5
-Replacement battery cartridge note : UPS accepts 1-4 additional battery packs
-Battery Charge Power (Watts) : 305 Watts
-Extendable Run Time : 1
-Runtime : View Runtime Graph
Communications & Management
-Interface Port(s) : DB-9 RS-232, RJ-45 10/100 Base-T
-Pre-Installed SmartSlot™ Cards : AP9631
-Control panel : Multifunction LCD status and control console
-Audible Alarm : Alarm when on battery : distinctive low battery alarm : configurable delays
-Emergency Power Off (EPO) : Yes
-Available SmartSlot™ Interface Quantity : 1
-Maximum Height : 356MM, 35.6CM
-Maximum Width : 483MM, 48.3CM
-Maximum Depth : 730MM, 73.0CM
-Net Weight : 104.09KG
-Shipping weight : 116.36KG
-Shipping Height : 508MM, 50.8CM
-Shipping Width : 584MM, 58.4CM
-Shipping Depth : 787MM, 78.7CM
-Color : Black
-Operating Temperature : 0 – 40 °C
-Operating Relative Humidity : 0 – 95 %
-Operating Elevation : 0 – 3048meters
-Storage Temperature : -15 – 45 °C
-Storage Relative Humidity : 0 – 95 %
-Storage Elevation : 0 – 15240meters
-Audible noise at 1 meter from surface of unit : 60.0dBA
-Online thermal dissipation : 1181.0BTU/hr
-Approvals : C-Tick, CE, EN 50091-2, EN 60950, IRAM, VDE
-Standard warranty : 2 years repair or replace, optional on-site warranties available, optional extended warranties available
Sustainable Offer Status
-RoHS : Compliant