Gambar APC BX2200MI-MS Back-UPS 2200VA, 230V, AVR, 4 universal outlets

Battery Backup & Surge Protector for Electronics and Computers

Key Features BX2200MI-MS
– Run time for load Min-max: 120-1200 W 1200 W 1m 22s
– Max. Capacity Used : 100%
– Output power capacity : 1.2kWatts / 2.2kVA
– Nominal Output Voltage : 230V
– Nominal Input Voltage : 230V
– Input Connections : IEC 60320 C14
– Cord Length : 1.2meters

Back-UPS Features & Benefits

“Manageability”
Audible alarms : 
Provides notification of changing utility power and UPS power conditions
LED status display : 
Quickly understand unit and power status with visual indicators.

“Availability”
Intelligent battery management : 
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test : 
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification : 
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

“Protection”
Battery and surge protected outlets : 
Back up and protect your hardware and data during power outages, surges and spikes .
Surge only outlets : 
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

“Marketing features”
Battery-protected and surge-only outlets : 
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

“Safety”
Safety-agency approved : 
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Technical Specifications BX1600MI-MS

Output
– Max Configurable Power (Watts) : 1.2 Watts / 2.2kVA
– Output Frequency (sync to mains) : 50/60 Hz +/- 1 Hz Sync to mains
– Topology : Line interactive
– Waveform type : Stepped approximation to a sinewave
– Transfer Time : 6 ms typical : 10 ms maximum

Input
– Input frequency : 50/60 Hz +/- 5 Hz Auto-sensing
– Input voltage range for main operations : 140 – 300V
– Number of Power Cords : 1
– Input Power Factor at Full Load : 0.54

Batteries & Runtime
– Battery type : Lead-acid battery
– Typical recharge time : 8hour(s)
– Nominal Battery Voltage : 24 V
– Expected Battery Life (years) : 3 – 5
– Battery Volt-Amp-Hour Capacity : 216
– Runtime : View Runtime Graph
– Efficiency : View Efficiency Graph

Communications & Management
– Control panel : LED Status display with on line : on battery
– Audible Alarm : Alarm when on battery : distinctive low battery alarm

Surge Protection and Filtering
– Surge energy rating : 273Joules
– Data Line Protection : RJ45 10/100/1000 Base-T Ethernet protection

Physical
– Maximum Height : 190MM, 19.0CM
– Maximum Width : 140MM, 14.0CM
– Maximum Depth : 390MM, 39.0CM
– Net Weight : 12.3KG
– Shipping weight : 13.3KG
– Shipping Height : 297MM, 29.7CM
– Shipping Width : 235MM, 23.5CM
– Shipping Depth : 495MM, 49.5CM
– Color : Black
– SCC Codes : 10731304410734

Environmental
– Operating Temperature : 0 – 40 °C
– Operating Relative Humidity : 0 – 95 (Non-condensing) %
– Operating Elevation : 0 – 3000meters
– Storage Temperature : -15 – 40 °C
– Storage Relative Humidity : 0 – 95 (Non-condensing) %
– Storage Elevation : 0 – 3000meters
– Audible noise at 1 meter from surface of unit : 40.0dBA
– Protection Class : IP20

Conformance
– Approvals : CE, EN/IEC 62040-1, EN/IEC 62040-2
– Equipment protection policy : Lifetime : 50000 euros
– Standard warranty : 2 years repair or replace

Sustainable Offer Status
– RoHS : Compliant