APC Smart-UPS SRT 3000VA, 230V, Lithium-ion, LCD, rackmount w/kit, 3U, 6x IEC 60320 C13 & 2x IEC 60320 C19 outlets, w/network card
High density, double-conversion on-line power protection with scalable runtime.
Includes: CD with software, Communication cable, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card
Key Features SRTL3000RMXLI-NC
-Run time for load Min-max: 270-2700 W 2700 W 10m 29s
-Max. Capacity Used : 100%
-Output power capacity : 2.7kWatts / 3.0kVA
-Rack Height : 3U
-Output Connections : (2) IEC 60320 C19 (Battery Backup) (6) IEC 60320 C13 (Battery Backup)
-Nominal Output Voltage : 230V
-Nominal Input Voltage : 230V
-Input Connections : IEC 60320 C20
-Cord Length : 1.8meters
Battery failure notification : Provides early-warning fault analysis on batteries enabling timely preventive maintenance
ECO Mode : Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
LCD graphics display : Text and mimic diagrams that display modes of operation, system parameters and alarms.
Rack/Tower convertible : Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Smart-UPS On-Line Features & Benefits
“Adaptability”
Rack/Tower convertible
-Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
-Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries
-Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
“Availability”
Automatic restart of loads after UPS shutdown
-Automatically starts up the connected equipment upon the return of utility power.
Scalable runtime
-Allows additional run time to be quickly added as needed.
Hot-swappable batteries
-Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Temperature-compensated battery charging
-Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic internal bypass
-Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Intelligent battery management
-Maximizes battery performance, life, and reliability through intelligent, precision charging.
“Manageability”
InfraStruXure Manager Compatible
-Enables centralized management via the APC InfraStruXure Manager.
Intelligent Card Slot
-Customize UPS capabilities with management cards.
Serial connectivity
-Provides management of the UPS via a serial port.
LED status indicators
-Quickly understand unit and power status with visual indicators.
Network manageable
-Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
“Marketing features”
Low operating and maintenance costs with proven reliability and intelligent battery management .
-Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Peace of mind that comes with full equipment compatibility and reliability of a leader
-Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Avoids costly power problems by keeping your IT equipment and data protected and available .
-Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Save time with easy and convenient remote/network accessibility.
-Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
“Protection”
Generator compatible
-Ensures clean, uninterrupted power to protected equipment when generator power is used.
Input power factor correction
-Minimizes installation costs by enabling the use of smaller generators and cabling.
Cold-start capable
-Provides temporary battery power when the utility power is out.
Frequency and voltage regulation
-Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Safety-agency approved
-Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Power conditioning
-Protects connected loads from surges, spikes, lightning, and other power disturbances.
Resettable circuit breaker
-Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
“Serviceability”
User-replaceable batteries
-Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Disconnected battery notification
-Warns when a battery is not available to provide backup power.
Audible alarms
-Provides notification of changing utility power and UPS power conditions
Predictive failure notification.
-Provides early-warning fault analysis ensuring proactive component replacement.
Automatic self-test
-Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Technical Specifications SRTL3000RMXLI-NC
Output
-Max Configurable Power (Watts) : 2.7kWatts / 3.0kVA
-Output Voltage Distortion : Less than 2 %
-Output Frequency (sync to mains) : 50/60 Hz +/- 3 Hz Sync to mains
-Other Output Voltages : 220 V, 240 V
-Load Crest Factor : 3 : 1
-Topology : Double conversion online
-Waveform type : Sine wave
-Bypass : Built-in bypass
Input
-Input frequency : 40 – 70 Hz Auto-sensing
-Number of Power Cords : 1
-Other Input Voltages : 220 V, 240 V
Batteries & Runtime
-Battery type : Li-Ion (Lithium-Ion)
-Typical recharge time : 4hour(s)
-Expected Battery Life (years) : 5 – 10
-Battery Charge Power (Watts) : 158 Watts
-Extendable Run Time : 1
-Battery Volt-Amp-Hour Capacity : 605
-Runtime : View Runtime Graph
Communications & Management
-Interface Port(s) : RJ-45 Serial, Smart-Slot, USB
-Pre-Installed SmartSlot™ Cards : AP9631
-Control panel : Multifunction LCD status and control console
-Audible Alarm : Audible and visible alarms prioritized by severity
-Emergency Power Off (EPO) : Yes
Surge Protection and Filtering
-Surge energy rating : 432Joules
Physical
-Maximum Height : 128MM, 12.8CM
-Maximum Width : 432MM, 43.2CM
-Maximum Depth : 639MM, 63.9CM
-Net Weight : 30.5KG
-Shipping weight : 41.4KG
-Shipping Height : 245MM, 24.5CM
-Shipping Width : 600MM, 60.0CM
-Shipping Depth : 870MM, 87.0CM
-Color : Black
-Units per Pallet : 12.0
Environmental
-Operating Temperature : 0 – 40 °C
-Operating Relative Humidity : 0 – 95 (Non-condensing) %
-Operating Elevation : 0 – 3048meters
-Storage Temperature : -20 – 50 °C
-Storage Relative Humidity : 0 – 95 (Non-condensing) %
-Storage Elevation : 0 – 15240meters
-Audible noise at 1 meter from surface of unit : 50.0dBA
-Online thermal dissipation : 317.0BTU/hr
-Protection Class : IP20
Conformance
-Approvals : CE, EAC
-Standard warranty : 5 year repair or replace
Sustainable Offer Status
-RoHS : Compliant
