APC Smart-UPS RT 5000VA 230V – APC SURTD5000XLI
Includes: CD with software , User Manual , Web/SNMP Management Card
Smart-UPS On-LineFeatures & Benefits
– InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Customize UPS capabilities with management cards.
– LED status indicators
Quickly understand unit and power status with visual indicators.
– Serial connectivity
Provides management of the UPS via a serial port.
– Network manageable
Provides remote power management of the UPS over the network.
– Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
– Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
– Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
– Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
– Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
– Scalable runtime
Allows additional run time to be quickly added as needed.
– Audible alarms
Provides notification of changing utility power and UPS power conditions
– User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
– Disconnected battery notification
Warns when a battery is not available to provide backup power.
– Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
– Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
– Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
– Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
– Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
– Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
– Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
– Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
– Save time with easy and convenient remote accessibility.
Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
– Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
– Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
– Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
– Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
– Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
– Cold-start capable
Provides temporary battery power when the utility power is out.
– Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Output power capacity: 3.5 KWatts / 5.0 kVA
Max Configurable Power (Watts): 3.5 KWatts / 5.0 kVA
Nominal Output Voltage: 230V
Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load: 92.0 %
Output Voltage Distortion: Less than 3%
Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages: 220, 240
Load Crest Factor: 3 : 1
Topology: Double Conversion Online
Waveform type: Sine wave
(8) IEC 320 C13 (Battery Backup)
(4) IEC Jumpers (Battery Backup)
(2) IEC 320 C19 (Battery Backup)
Bypass: Internal Bypass (Automatic and Manual)
Nominal Input Voltage: 230V
Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
Input Connections: Hard Wire 3-wire
Input voltage range for main operations: 160 – 280V
Input voltage adjustable range for mains operation: 100 – 280 (half load)V
Efficiency at Full Load: 92.0 %
Other Input Voltages: 220, 240
Batteries & Runtime:
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules: 2
Typical recharge time: 2.5hour(s)
Replacement Battery: APCRBC140
Expected Battery Life (years): 3 – 5
RBC Quantity: 1
Extendable Run Time: 1
Communications & management:
Interface Port(s): RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot
Pre-Installed SmartSlot™ Cards: AP9631
Control panel: LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO): Yes
Surge Protection And Filtering:
Surge energy rating: 555JJoules
Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height: 432mm , 43.2CM
Maximum Width: 130mm , 13.0CM
Maximum Depth: 660mm , 66.0CM
Rack Height: 3U
Net Weight: 54.43KG
Shipping weight: 63.64KG
Shipping Height: 347mm , 34.7CM
Shipping Width: 603mm , 60.3CM
Shipping Depth: 980mm , 98.0CM
Master Carton Units: 1.0
Units per Pallet: 6.0
Operating Temperature: 0 – 40 °C
Operating Relative Humidity: 0 – 95% non-condensing %
Operating Elevation: 0-3000meters
Storage Temperature: -15 – 45 °C
Storage Relative Humidity: 0 – 95% non-condensing %
Storage Elevation: 0-15000meters
Audible noise at 1 meter from surface of unit: 55.0dBA
Online thermal dissipation: 1057.0BTU/hr
Protection Class: IP 20
Approvals: C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, UL 1778, VDE
Standard warranty: 2 years repair or replace, optional on-site warranties available, optional extended warranties available
Sustainable Offer Status
PEP: Available in Documentation tab
EOLI: Available in Documentation tab
Kata Kunci Terkait:
UPS APC SURTD5000XLI, jual APC SURTD5000XLI, harga APC SURTD5000XLI, spesifikasi APC SURTD5000XLI, beli APC SURTD5000XLI, servis APC SURTD5000XLI