Prolink Master II Series (1P/1P) Rack / Tower
Prolink Master II Series (1P/1P) Rack / Tower Type is a true online double conversion single phase UPS system which is designed to deliver clean and
high quality electrical power to fully protect critical devices in wide range of applications. High input power factor correction in the system improves the efficiency and reduces overall losses. UPS is equipped with 3-stage smart charging design to optimize battery performance. This feature extends the useful service life of battery and optimizes battery recharge time. The front panel LCD display comes with rotation feature which to be used for both rack and tower types. The UPS systems have USB and RS-232 communication ports as standard, with a built-in intelligent slot for additional adapters, protocol converters and relay contact cards. SNMP option is also available for power management via SNMP manager and web browser. Prolink Master II series (1P/1P) Rack /Tower p.f 0.9 Type is available in capacities ranging from 1KVA to 3KVA. In addition, Emergency Power Off (EPO) function is also available for the UPS models and which is used to protect the personnel and the equipment in case of fire outbreak or other types of emergency.
– USER-FRIENDLY AND EASY-SHIFT LCD DISPLAY
– TRUE DOUBLE-CONVERSION
– OUTPUT POWER FACTOR 0.9
– EMERGENCY POWER OFF (EPO) FUNCTIONG
– 50/60HZ FREQUENCY CONVERTER MODE
– PROGRAMMABLE POWER MANAGEMENT OUTLETS
Key Features
• True double-conversion online UPS
• Output power factor 0.9
• User-friendly and easy-shift LCD display
• Rack/Tower design
• Programmable power management outlets
• 50/60 Hz frequency converter mode
• ECO and advanced ECO mode for energy saving
• Emergency Power Off Function (EPO)
• Hot-swappable battery design
Specifications PRO803-ERS/ERL 3KVA
GENERAL
– UPS Type : Rack / Tower
– Phase : Single phase with ground
– Rating (VA) : 3000
– Nominal Power (W) : 2700
– Standard Model Dimension (mm) : 630 x 438 x 88 [2U] (D x W x H)
– Weight (kg) : 28
– Long-run Model Dimension (mm) : 510 x 438 x 88 [2U] (D x W x H)
– Weight (kg) : 10.5
INPUT
– Connection Type : IEC 320-C14
– Nominal Voltage : 200/208/220/230/240 VAC
– Voltage Range : 55-150 VAC ± 5% 110-300 VAC ± 5%
– Frequency Range : 40Hz ~ 70Hz
– Power Factor : ≧0.99
OUTPUT
– Connection Type : 8 x IEC 320-C13 1 x IEC 320-C19
– Nominal Voltage : 200/208/220/230/240 VAC
– Voltage Regulation : ±1%
– Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz
– Frequency Range (Batt. Mode) : 50 Hz ± 0.5% or 60Hz ± 0.5%
– Current Crest Ratio : 5:1 (max.)
– Harmonic Distortion : ≦2% THD (Linear load) ≦4% THD (Non-linear load)
ALARM & INDICATORS
– Battery Mode : Sounding every 4 seconds
– Low Battery : Sounding every second
– Overload : Sounding twice every second
– Fault : Continuously sounding
– LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault
CONNECTIVITY, CONTROL & MONITORING
– Front panel : Status LED, Function keys, LCD display
– Communication : Smart RS232* USB Port Emergency Power Off (EPO)
BATTERY
– Standard Model Type : 12V / 9Ah
– Numbers : 4.6
– Typical Recharge Time : 4 hours recover to 90% capacity
– Long-run Model Type : Depending on the capacity of external batteries
– Numbers : Depending on the capacity of external batteries
– Charging Current (max) : 1A / 2A / 4A / 8A
Rear Panel 1-3KVA
1. Programmable outlets: connect to non-critical loads
2. Output receptacles: connect to mission-critical loads
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector (EPO)
7. USB communication port
8. RS-232 communication port
9. Intelligent slot
10. External battery connector
11. Cooling Fan
